2018 Car Styling Auto Key Makers Hitag2 V3.1 Auto Keys Programming HiTag 2 V3.1 KEY Programmer Tool immo, remote, read PIN, VIN

2018 Car Styling Auto Key Makers Hitag2 V3.1 Auto Keys Programming HiTag 2 V3.1 KEY Programmer Tool immo, remote, read PIN, VIN
  • Продавецshop.widaryanto.info
  • Список ценUS $60.90piece
  • Продажная ценаUS $60.90piece
  • ДоставкаБесплатная доставка
  • Рейтинги3,4 (510)

Oписание продукта


Digiprog 3 V4.94 ST01 ST04 Odometer Programmer Digiprog III correction mileage adjust tool Multi-Languages one year warranty



Top 7 Reasons To Get V4.94 Digiprog3 Odometer Master Programmer:

1. This is newest version Digiprog3 with most competitive price.
2. Newest Version: V4.94
3. Supported Languages: Deutsch, English, Espanol, French, Portuguese, Italian, Turkish, Nederlands.
4. Worldwide leader in digital speedo programming and correction software.

5. Quality standards are second to none.
6.Years of experience in digital vehicle engineering.
7. Professional technical service.
Notice: Power-On Password:1



The link are two kinds of tool, one is Digiprog3 with full set, one is Digiprog3 obd version, as picture show.


Digiprog3 with full set




Digiprog3 obd version


digiprog iii obd version (1)


Software Version:Newest V4.94






Digiprog III mileage correction tool is with software,  This is new DIGIPROG III mileage correction tool which can do the odometer programming. Intelligent accessories and extensive manuals are enclosed.




Digiprog 3 mileage correction tool has many languages:


Deutsch, English,Espanol,French,Portuguese,Italiano,Turkey,Nederlands.

This digiprog 3 mileage correction tool is based on digimaster iii, it can be updated for free.


Newest Version Digiprog III /3 Odometer Programmer with Full Software New Release V4.94

DigiProgIII is the worldwide leader in the production and marketing of digital speedo programming and correction software.Updated to V4.94 now.

Digiprog IIIProgrammer with Full Software With the use of the new DIGIPROG III, the odometer adjustment is a breeze. Intelligent accessories and extensive manuals are enclosed.

Update:Dear friend, if you want to update the digiprog 3, need to return the main unit back for us. Because it is update by the main unit, not by the internet. Pls know it




Digiprog 3 V4.94 Features:

1. Service Interval Adjustments and Settings
Assyst processing
Fault memory read-erase
EEPROM programmer
Integrated PC communication
Some Important Tips for Using Digiprog 3:
1. Always connect the Eeprom to the ST01 or ST04 before you connect to the DigiProg this will avoid Electro static feedback (ESD).
2. Never solder the connections whilst the lead is connected to the programmer, this will damage the DigiProg.
3. Always keep your DigiProg in its case when not in Use & keep it in a dry environment at night (don`t leave it in the trunk of your car) If you are using solvents to remove lacquers` from Eeprom`s ensure that they are cleaned 4. completely as the solvent can damage the clips.
Digiprog 3 Menu:
1. EEPROM Menu
The first option on the main menu is the Eeprom menu. Reading, writing and saving Eeprom information is all done using this menu. A more detailed guide to using this menu follows later on in the introduction.
This is the menu you will use for correcting and reprogramming vehicles. Manufacturers are set out in alphabetical order and models of vehicles are set out in a simple sub-menu format.
3. Motorcycle Menu
This menu is the same as the CAR/TRUCK menu but is used for reprogramming motorcycles.
4. Special Functions Menu
The special functions menu is for use only by official DigiProg dealers.
5. Setup Menu
This menu is where settings on your DigiProg can be changed. Language, password, brightness, volume, and the time/date can all be set and changed in this menu. You can also change whether your machine is working in kilometres or miles.
Using the EEPROM Menu:
On some of the vehicles you will come across, an eight pin Eeprom chip will be used to store the vehicle data. These chips hold vital information from the vehicle such as ignition and immobiliser codes. Loss of this information could result in anything from minor faults, to major faults involving the vehicle not starting and having to be taken to the main dealer. This is why it is very important to read and save the original information from the Eeprom before programming, this way if any errors do occur you can always return to the point you started.The process of reading and saving this information is very simple. The Eeprom chip itself will have a mask number printed across the top of it, for example a widely used chip is a 93C46. You can connect the chip to your DigiProg by using adaptor ST01 or ST04. Most chips are surface mount eeproms which will use ST01, but the larger DIL chips will use ST04.


V4.94 Add Model List:
For F0rd :
F150 24C16
F-alcon 24c02 
K-uga Transit 
For Me-rcedes :
W176 new version
W204 new version Diag
W212 new version Diag
R 172 D-iag new version
R 231 D-iag new version
For 0pel :
In-signia new version
A-stra new version
For A-u-di :
A6 D-iag new version
A8 D-iag new version
For V-WW :
A-marok Polo Johnson

Package list:

1pc x Digiprog3 Main Unit
1pc x OBD2 Cable
1set x Cables and Adapters


digiprog3 main unit 1digiprog3 main unit 2digiprog3 main unit 3digiprog3 main unit 4digiprog3 main unit 5digiprog3 cabledigiprog3 cables (1)digiprog3 cables (3)digiprog3 cables (4)digiprog3 cables (5)digiprog3 cables (2)digiprog3 will full cables



2017 Newest V4.94 Professional Digiprog III Digiprog 3 Odometer Programmer With Full Software digiprog3 full set with all cables




After-sale service5 star feedback