Sheet metal folding machines, Manual/TDF sheet metal bending machine

Sheet metal folding machines, Manual/TDF sheet metal bending machine
  • Продавецshop.widaryanto.info
  • Список ценUS $1100.00piece
  • Продажная ценаUS $1100.00piece
  • ДоставкаБесплатная доставка
  • Рейтинги3,4 (756)

Oписание продукта

aeProduct.getSubject()

 

 

New Arrival Zb-100 High Quality Manual Sheet Metal Plate Bending Machine For Iron,

Copper, Aluminum, Stainless Steel And So On

 

Notice : when the parcel arrived to your customs  ,please pay the           

            tax and pick up the parcel  ,we are not responsible for            

            any customs duty or import tax  


           
   if your place is remote ,then need to pay 35usd .

 

 

 Picture showing :

 

B

 

Specification:

 

Product Name: Zb-100 manual bending machine
Maximum width: 110mm (ie 110mm or 11cm or 11cm or 0.11m)
Applicable to the maximum thickness: 0 ~ 2mm. Narrow little 2.5mm or 3mm no problem
Minimum hemming height: 8mm. Thinner material, can be smaller to 5mm
Bend angle: 90 degrees
Size: 220 * 80 * 80mm
Weight: 2.3KG

Parameter:

Maximum width: 110mm, (ie 110mm or 11cm or 11cm or 0.11m), but some size conditions will

interfere with the sleeve nut, the maximum width of 100mm. (Note: remove the sleeve nut for

ordinary nut, can be more out of 10mm)

Applicable to the maximum thickness: 0 ~ 2mm. Narrow little 2.5mm or 3mm no problem.

(Note: If it is 3mm, then need to change the machine, increase the gap Caixing)

Applicable materials: iron, copper, aluminum, stainless steel and so on.

Minimum hemming height: 8mm. Thinner material, can be smaller to 5mm.


Bending angle: 90 ° (has been considered the rebound angle, the pressure plate for the slope,

that is, for the rebound angle is small, the actual can be folded to 85 degrees look)
(Rebound angle, refers to the different materials, or the same material, different thickness, after

bending, the rebound back to the angle, any material has a rebound angle)

Forming ability:
Depending on the size of the upper platen, the upper platen is 25 mm wide and 8 mm thick.

aeProduct.getSubject()aeProduct.getSubject()