2018 Kess V2 Master 5.017 OBD2 Manager Tuning Kit Kess V5.017 ECU OBD2 Car/Truck Programmer Tool Kess V2 V2.47 EU Red Board

2018 Kess V2 Master 5.017 OBD2 Manager Tuning Kit Kess V5.017 ECU OBD2 Car/Truck Programmer Tool Kess V2 V2.47 EU Red Board
  • Продавецshop.widaryanto.info
  • Список ценUS $65.95piece
  • Продажная ценаUS $65.95piece
  • ДоставкаБесплатная доставка
  • Рейтинги4,4 (736)

Oписание продукта

Creader 319
Maxilink 629


Product Pictures


PASS-CODE Screenshot main NEW



Product Descriptions

PASS-CODE Calculator for Toyota, Lexus, Scion
PASS-CODE Calculator used for programming keys for T-oyota, L-exus and S-cion models. Avaliable for programming used or new keys and smart-keys. Also used for Smart Code Resetting. You can use T-oyota Techstream software and any OEM hardware compatible interface. This item allows you use factory procedure for programmong keys without online-service.
PASS-CODE Calculator works ONLY with USB-Key.
Instructions how to update PASS-CODE Calculatror
1. Connect USB-key to USB port.
3. Select "Remote Update System"
4. Open file "Update_X_X.rux"
5. Waiting untill the message "Uploading the file successfully"
6. Now you can use new version of software :)
Pass-Code Calculator with USB-key is ONLY for personal using. 
If you will use it in commerce (for example, receiving payment for calculation) or for illegal action, your USB-key will be blocked beyond recovery.
Instructions how to use PASS-CODE Calculatror
Smart Code Reset:
1. Connect to the vehicle:
2. Select Division, Model, Year, Engine and specify Options:
3. Select ECU Smart Key for Smart resetting:
4. Click for Utility:
5. Then choose Smart Code ResetinUtility Selection Menu:
6. Make sure driver door is open. Other doors must be closed. Don\'t touch
steering wheel and pedal.
ATTENTION! Smart Code Reset utility will erase all smart codes in vehicle!
7. Click Pass-Codebutton and copySeed Number to clipboard. Not need to
use for T-oyota Online.
8. Open PASS-CODE Calculator. Paste VIN vehicle, Seed Number and press
Calculate. You will get Pass-Code Number. Paste Pass-Code, click "Next"
and confirm:
9. Smart Code Reset will start. Wait for 16 Minutes for Smart Resetting. Then
use one of the T-oyota factory procedure for programming keys.
Smart-Key Programming procedure:
(Example, when ID Code Box and Smart ECU had replaced. Smart Code
Reset must be performed!)
1. Select Smart Code RegistrationinUtility Selection Menuand pressNext:
2. Choose third point and press Next:
3. Program keys. To register key touch the Power/Engine Switch with the key
you will hear a signal, and then move the key to the center of car cabin
you will hear a signal once again. To register second, third key, etc. just
repeat "touch and move" operations. You have 30 seconds to do this.
4. Smart Code Registration is complete.
IMPORTANT! You can use this Smart Code Registration procedure even ID
Code Box and Smart ECU had not been replaced. Both for new and used
EXTRA: PASS-CODE Calculator works only with USB key.

Supported Cars

Supported software versions for Toyota Techstream:

Techstream  13.20.017    New!  

Techstream 13.10.019 

Techstream 13.00.022 

Techstream 12.30.017

Techstream 12.20.024
Techstream 12.10.019
Techstream 12.00.127
Techstream 12.00.125
Techstream 12.00.124
Techstream 11.30.137
Techstream 11.30.124
Techstream 11.30.037
Techstream 11.30.024
Techstream 11.20.019
Techstream 11.10.034
Techstream 11.00.019
Techstream 11.00.017
Techstream 10.30.029
Techstream 10.30.025
Techstream 10.20.030
Techstream 10.10.018
Techstream 10.00.028
Techstream 9.31.000
Techstream 9.30.029
Techstream 9.30.002
Techstream 9.20.022
Techstream 9.20.021
Techstream 9.10.038
Techstream 9.10.037
Techstream 9.00.026
Techstream 9.00.025
Techstream 8.30.023
Techstream 8.20.019
Techstream 8.11.006
Techstream 8.10.021
Techstream 8.00.034 

Related Products