Online EU Version Red PCB KTAG V7.020 ECU Programmer Tool K TAG Firmware 7.020 Software V2.23 OBD2 Manager Tuning Kit k tag

Online EU Version Red PCB KTAG V7.020 ECU Programmer Tool K TAG Firmware 7.020 Software V2.23 OBD2 Manager Tuning Kit k tag
  • Продавецshop.widaryanto.info
  • Список ценUS $71.19piece
  • Продажная ценаUS $71.19piece
  • ДоставкаБесплатная доставка
  • Рейтинги3,2 (278)

Oписание продукта

Product Introduction

 

VVDI PROG Programmer

 

Top 8 Reasons to Get VVDI Prog V4.8.0:

1. Support R&W lots of chips, include MC9S08 series, MC68HC(9)12 series,MC9S12 series, V850 series, H8X series, R8C series, PCF79XX series and most eeprom chips
2. Support chip data verify, check blank function
3. Support data file compare function
4. Support R&W fpr BMW N20, N55 ECU ( show ISN directly )
5. Stable R&W MC9S12XE series chips (5M48H/1N35H/2M53J/3M25J etc.)
6. Support renew PCF79XX remote, currently support for BMW E/F series
7. Lots of connection diagram
8. Support Multi-language now: English, Arabic, Czech, French, Italian, Polish, Portuguese, Russian, Spanish, Turkish & Chinese Simplified
 

Buy VVDI-Prog programmer, 
get free for BMW ISN read function and NEC, MPC, Infineon etc chip continously update service.
 

VVDI Prog Latest Update Information:

VVDI PROG latest software version V4.8.0 update

v4.8.0 (2018-2-27)
* This version DON\'t need update firmware
+ Add VVDI PROG USER MUNUAL 4.8.0 version in Doc folder
+ Add 25AA010, 25AA020, 25AA040, 25AA080, 25AA128, 25AA160A, 25AA160B, 25AA256, 25AA320,25AA640, 25LC160A, 25LC160B,
25LC1024 options in <1-EEPROM&FLASH>-><MICROCHIP>
+ Add 25AA010(CLIP), 25AA020(CLIP), 25AA040(CLIP), 25AA080(CLIP), 25AA128(CLIP), 25AA160A(CLIP),25AA160B(CLIP), 25AA256(CLIP), 
25AA320(CLIP), 25AA640(CLIP), 25LC160A(CLIP), 25LC160B(CLIP), 25LC1024(CLIP) options in <1-EEPROM&FLASH>-><MICROCHIP(CLIP)> 
+ Add MB91F534B options in <2-MCU>-><FUJITSU-MB9XF>
+ Add MC9S12XS64_SECURED, MC9S12XS128_SECURED, MC9S12XS256_SECURED options in <2-MCU>-><for MOTOROLA-MC9S12>
+ Add R7F701071 options in <2-MCU>-><RENESAS-RH850> 
+ Add F_ENGINE_MEVD1723(F20)EEPROM options in <3-ECU>-><for BMW> 
+ Add F_ENGINE_MEVD172K(F20)EEPROM options in <3-ECU>-><for BMW> 


 

VVDI PROG latest software version V4.7.9 update (2018-1-27)

* This version DON\'t need update firmware
+ Add VVDI PROG USER MUNUAL 4.7.9 version in Doc folder
+ Add MBM29F400TC/BC-PF, MBM29F400TC/BC-PFTR, MBM29F400TC/BC-PFTN, MBM29F200TC/BC-PFTN, MBM29F200TC/BC-PFTR,
MBM29F200TC/BC-PF, MBM29F800TA/BA-PFTR, MBM29F800TA/BA-PFTN, MBM29F800TA/BA-PF options in <1-EEPROM&FLASH>->
+ Add TC1793-CAN options in <2-MCU>->
+ Add R5F64525JFD, R5F64525LFD, R5F64525KFD, R5F6452NJFD, R5F6452NLFD, R5F6452NKFD options in <2-MCU>->
+ Add SPC5607B options in <2-MCU>->
+ Add RATTAN-ZS options in <5-DASHBOARD>-> 
+ Add HYOSOW-S2-COMPUTER options in <8-OTHER>-> 
+ Add HYOSOW-S2-CCM options in <8-OTHER>-> 
+ Add A6L-C7-SUNROOF-for MOTOR options in <8-OTHER>->

 

VVDI Prog Latest Software Version V4.7.8 Update (21.12.2018)
This version DON\'t need update firmware
+ Add VVDI PROG USER MUNUAL 4.7.8 version in Doc folder
+ Add R5F100XXX_Data_4KB_Read, R5F100XXX_Data_4KB_Write, R5F100XXX_Data_8KB_Read, R5F100XXX_Data_8KB_Write, R5F100/101xEx_Flash_64KB_WRITE,
R5F100/101xEx_Flash_64KB_Read, R5F100/101xEx_Flash_64KB_Write, R5F100/101xAx_Flash_16KB_Read, R5F100/101xAx_Flash_16KB_Write, R5F100/101xCx_Flash_32KB_Write,
R5F100/101xCx_Flash_32KB_Read, R5F100/101xCx_Flash_48KB_Write, R5F100/101xCx_Flash_48KB_Read, R5F100/101xCx_Flash_96KB_Read, R5F100/101xCx_Flash_96KB_Write,
R5F100/101xCx_Flash_128KB_Read, R5F100/101xCx_Flash_128KB_Write, R5F100/101xCx_Flash_192KB_Write, R5F100/101xCx_Flash_192KB_Read, R5F100/101xCx_Flash_256KB_Read,
R5F100/101xCx_Flash_256KB_Write, R5F100/101xCx_Flash_384KB_Write, R5F100/101xCx_Flash_384KB_Read, R5F100/101xCx_Flash_512KB_Read,R5F100/101xCx_Flash_512KB_Write
options in <2-MCU>->
+ Add MG3(2013) options in <5-DASHBOARD>->
+ Add MG3(2013) options in <5-DASHBOARD>->
+ Add WEIWANG-E50F(2018) options in <5-DASHBOARD>->
+ Add WEIWANG-S50 options in <5-DASHBOARD>->
+ Add AX7 options in <5-DASHBOARD>->
+ Add MONDEO(2017) options in <7-AIRBAG>->
+ Add CIVIC(2016) options in <7-AIRBAG>->
+ Add SANTAFE-72 options in <7-AIRBAG>->
+ Add MONDEO-AIR-CONTROLLER- MODULE(2007) option in <8-OTHER>



How To Update VVDI Prog Programmer Online

This function require internet support
Click the “Upgrade” button enter the upgrade interface, show as following picture
170815230529226397
Enter update interface, if software show ”communication with server failed”,please close your Anti-virus and computer firewall and retry. If software show “unable to find equipment”, please reconnect device
Tip information show the latest software version and upgrade information
 Device information show the device SN, device firmware version and the latest firmware version

 Firmware upgrade steps:
1. Select the firmware version
2. Click “Start Firmware Upgrade” button
3. Don’t close or pull out USB cable before upgrade finished

Software upgrade steps:
1. Click “Software Link 1” or “Software Link 2” button, download software from the web
2. Extract the file

VVDI Prog Programmer Supported Type List:

Memory:
ATMEL,CATALYST,EXEL,FAIRCHILD,INTEL,MICROCHIP,MITSUBISHI,ST,TOSHIBA,XICOR

MCU:
RENESAS V850,RENESAS H8X,RENESAS R8C,MOTOROLA MC68HC(9)08,MOTOROLA MC68HC(9)12
MOTOROLA MC9S08,MOTOROLA MC9S12,NXP PCF79XX,ST ST10F,INFINEON XC2XXX,ATMEL,ATMEGA XXXX,
INFINEON XC164CS,MICROCHIP PIC18F,

VVDI Prog Programmer Support Model List:

ECU List:
for BMW E Series,for BMW F Series,for BOMBARDIER,for CHANGAN,for DELPHI,for MAGNETI,for MARELLI,
for RENAULT,OTHER


IMMOBILIZER List:
for AUDI,for BENZ,for BMW,for BUCIK,for CHEVROLET,for STEC,for CHRYSLER,for FIAT,for FORD,for GREATWALL,for INFINITI,for LANDROVER,
for JAGUAR,for NISSAN,for OPEL,for PORSCHE,for RENAULT,for SAICMOTOR,for VOLKSWAGEN,for ZHONGHUA.

DASHBOARD List:
for BUICK,for CHANGAN,for CHERY,for CHEVROLET,for DONGFENG,for FAW,for FORD,for GEELY,for GREATWALL,for HAFEI,for TOYOTA,
for HANTENG,for HAIMA,for HONDA,for JAC,for JAGUAR,for JINBEI,for JMC,for LUXGEN,for NISSAN,for SGMW,for VOLOVO,for ZHONGHUA,for ZOTYE

REMOTE List:
for BMW E Series,for BMW F Series

VVDI PROG Connection for Maybach:

151214154338007573522

VVDI Prog Connection for Sprinter:

 
151214154338007566267150910154338007532179
 

VVDI Prog Programmer Unit Description:

1.16 Pin DIP socket Function:
Read EEPROM chips Use method: Follow the image direction when insert the DIP chip (PIN1 as yellow point show as the picture);
SOP chip need soldering on 16Pin adaptor first, then insert the chip follow the image direction

150824154338007526039
2. MCU Reflash Cable
    Function:       Read & Write MC68HC(9)12, V850, H8X, R5C series chips,current version is V2
   Use method: Soldering the line on pin of chip before read & write
   Notes:
     (1) Please check all connection lines,ensure correct and reliable connection
     (2) Please Don’t lengthen CLK and GND-C line, maybe cause read data failed.

150824154338007573049

3. ECU Reflash Cable
        Function:          Read & Write engine ECU
        Use method:   Connect the ECU and R&W
        Notes:               Please check all connection lines, ensure correct and reliable connection

150824154338007584823

4.MC9S12 Reflash Cable
     Function: Read & Write MC9S08, MC9S12 series chips, current version is V1
     Use method: Soldering the line on pin of chip before read & write
     Notes:
       (1) Please check all connection lines,ensure correct and reliable connection.
       (2) Please Don’t lengthen CLK and GND-C line, maybe cause read data failed.

150824154338007589330
 

VVDI Prog Programmer Feedback:

did a few tests today and this is what I found out.
It seems that VVDI prog reading speed is dependent on the processor speed of the computer.
CAS3 0L15Y flash read times
Centrino processor @ 1.6ghz Windows XP = 12mins
Core2 Duo processort @ 2.5ghz Windows 7 32 bit = 5 mins
i7 @ 4.4ghz Windows 7 64 bit = 2mins 30 seconds.
Other programmers do not seem to be affected by processor speed at all.
I also would of thought this was a fairly easy question to answer without me doing all the testing
Tested by me: cas 2, cas 3, cas 3+, Cas4 5m48h, volvo cem v40 all ok.
Is a very good tool and for bmw cas4 .
I tested today D80 and a m35080v6, and they work perfect.
Mine erased D160 (for BMW F01 dash) with no problem.
Tried to renew bmw e series 868 key. Vvdi programmer claimed operation success but in tango key is now recognized as transponder type A. locked
I did renew 2 keys! Both worked and now are programmed to cars!
Only thing you need to disconnect from PCB is battery while writing the renew file. (Remove the batteries)
Renew for BMW series E 868 key – 100% OK z vvdi-prog v4.5.7
FRM3 works perfectly
More EDC17 under ECU section would be great!
Especially BMW EDC16 and EDC17 for ISN purposes.
for BMW F series FEM module reading but for that i can only dream about…
for BMW BMSX bike ECU would be great…
Renew pcf7946 and 29f family
Renew E series remote with pcf7942 / pcf7944 would be fine
Unlock and download the 9S12G128 secure without erasing it first would be nice .
erasing all 35080s and d80 with soic clip would be super nice too!
I read the CAS3+ MCU with VVDI Prog and that worked perfect.
for BMW FRM3 series Exx – READ and WRITE – OK
for BMW KEY series Exx – OK
for BMW DashBoard 6WB 160DQWT – READ , ERASE , WRITE – OK


VVDI Prog Programmer Package List:

171013004850232597171013004850232598

1. VVDI Prog device
2. EEPROM Socket
3. EEPROM Adapter
4. MC9S12 Reflash Cable V1
5. MCU Reflash Cable
6. ECU Reflash Cable
7. USB B-Tyte Cable
8. TB28FXXX Adapter (Optional)
9. PCF79XX Adapter (Optional)
10. New M35080/D80 Adapter (Optional)
11. New EWS3 Adapter (Optional)
12. New EEPROM CLIP Adapter (Optional)
13. New EWS4 Adapter (Optional)

 
 
Product Picture
20150819321842232015081932184225201508193218422620150819321842282015081932184229201508193218423020150819329871112015081932987112
 
20150910386002622015091038600263201509103860026420160714351614342015081932987113201509230826533120180303035687432017072829590709
2017072829590710