TCP/IP Access Control Panel Access Control Board ZK C3 400 4 Doors Access Control System With Power Supply Box Battery Function

TCP/IP Access Control Panel Access Control Board ZK C3 400 4 Doors Access Control System With Power Supply Box Battery Function
  • Продавец
  • Список ценUS $152.00piece
  • Продажная ценаUS $152.00piece
  • ДоставкаБесплатная доставка
  • Рейтинги4,1 (161)

Oписание продукта




inBIO460 a new concept access controller based on biometric identification aims to improve the security of users’ life and information, it means that visitors need to place fingerprints on reader and the data collected is transferred to controller to verify. inBIO460 is specially designed for applications like home, offices and enterprises, users may choose from serial communication or Ethernet to get linked to software for central management, meanwhile, the distance between controller and RS485 readers could be more than 800m. inBIO460 is very convenient and safe for users to connect other security products for its groove socket, even quietly brilliant to see its working status through LED indicators on surface. Web-based management helps know about the local events on e-map and video remotely in real time control. We believe it will bring a big revolution of access control market in the world.




- Truly biometric identification inside of access controller

Users place fingerprints on reader, and access controller verifies the biometric data transferred from RS485 reader directly.

- Supports ZKBioGO app to open the door

- Supports external SD Card for database back-up

inBIO460 is standard with SD Card slot, it enhances events capacity and protects database missing.

- 800m distance between RS485 reader and controller at least

It is steadily compatible working with RS485 fingerprint reader, and enhances the communication distance to 800m at least.

- Quietly brilliant to know about controller’s working state by LED indicators

There are five LED indicators on the housing of inBIO460; they indicate whether power is on , whether controller runs steadily, whether the identification is valid, and whether data is transferred from RS485 readers normally.

- Easy to remotely control and know the status of any door

Users may remotely close or open the door anywhere on software and know the status on e-map

-Video surveillance linkage

Pre-setting video surveillance linkage function on software, illegally operating on reader would active the camera to take photo or record video immediately. 

- Multiple hardware protection measure

There are over-current protection, over-voltage protection, reversal protection for the power supply and all the input and output terminal.

- Integration with Other Security Systems

InBIO460 can be integrated with other security systems such as CCTV, fire alarm, BAS (building automation system) and other systems to configure total security system.

-Supports different wiegand reader

The controller supports different wiegand format, and can connect to different reader, including ID card reader, Mifare card reader and HID card reader

-Input/Output Ports to Control Doors

Connect with variety of sensors, alarms, exit buttons, electric lock and other devices.

-Variety of Communication Function

Using either serial or TCP/IP communication, it provides reliable network system

-B/S structure software

It is easy to manage the system by browser from client PC. There is no need to install software on each client.

-Normal open after first punch card can be setup

-Real-time Monitoring of Door status

Using the management software, it allows real-time monitoring and control of door opening and closing of the whole system.

-Simple Access Control System Configuration

-Interlock function

Link different doors with special logic that one door is Open, others should be closed.

-Multi-card operation

This function is used to manage visitors or to manage some special high secure place. The doors are opened when appointed number registered cards are read together.


-Duress Mode

-SDK available

The system integrator can use the SDK to integrate the hardware into their existing access control software system or to develop a new software.







32bit MIPS CPU


32M bits

Flash Memory

128M bits

Fingerprint Capacity


Card Capacity


Event Buffer


SD card backup


Power / Current

DC 9.6V-14.4V, Rated Max.1A

Wiegand Reader Port

4ea (26bit Wiegand, 8bit Burst for PIN)

RS485 Reader Port

1ea Extended RS485 Port



Baud Rate

38,400bps (Recommended) / 9600bps, 19,200bps, 57,600bps (selectable)

Input Port

8ea (Exit Button#1,  Door Sensor#1; Exit Button#2,  Door Sensor#2; Exit Button#3,  Door Sensor#3; Exit Button#4,  Door Sensor#4)

Output Port

4ea (4 FORM-C Relay Output, SPDT [email protected]/[email protected])

4ea (4 Aux FORM-C Relay Output, SPDT [email protected])

LED Indicator

Yes, LED indication for communication, power, status and punch card

Operating Temperature

0°to +55°C

Operating Humidity

10% to 80% relative humidity non-condensing

Dimension (H*W*D)mm

226*106*36(Single board)

400*330*90.5(with power supply and metal cabinet)

Housing Material








Fingerprint reader:
FR1200 is a fingerprint reader with RS485 communication interface works with biometric access controllers and fingerprint standalone access control, including inBIO series controllers, F8 and so on. It offers the function of capturing and transferring fingerprint samples to access control panel inside to match. With its IP65 rated rugged structure, FR1200 offers extra durability in all weather conditions including outdoor environments.



CPU: 324MHz
Sensor: ZK small-sized sensor
Communication: RS485
Standard function: ID Card Module
Optional function: MF Card Module
Voice Prompt: Buzzer
Working Voltage: 12VDC
Working Temperature: 0~45
Dimension(W*H*D)mm: 50*102*37.3
Protection Grade: IP65



Fingerprint Sensor:
ZK4500 is a stable and excellent fingerprint reader. The device can capture fingerprint image and upload e to the PC by USB interface. ZK4000 supports most of the Windows OS, including Window xp, vista and Windows 7(32bit). We provide developer with SDK. The developer can integrate the ZK4000 hardware with their own system. This product is widely used in social insurance, public security, time attendance, fingerprint encryption, embedded system and other fields of application.
· High-performance, maintenance-free optical fingerprint sensor
· Readily accessible for any finger
· High quality industrial-class ABS plastic material with scratchproof texture surface
· treatment
· Removable weighted stand
· High speed USB interface
· LED indicates the status of the device
· Driver CD included
· Available SDK for secondary development


· Fingerprint sensor: optical
· Resolution: 500 DPI / 256 gray
· Sensing Area: 15*18mm
· Image Size: 280*360pixel
· Interface: USB
· Support O/S: Windows XP and Vista, windows 7(32bit)
· Operating Temperature: 0-55C / 32-131F
· Operating Humidity: 20-80%
· Color: Black
· USB Cable: 150 CM
· Weight: 0.20kg
· Dimension (WxLxH): 65.5*49*79.8