Co2 Laser Lens 25mm USA ZnSe laser focus length 127mm Focal Length

Co2 Laser Lens 25mm USA ZnSe laser focus length 127mm Focal Length
  • Продавецshop.widaryanto.info
  • Список ценUS $61.75piece
  • Продажная ценаUS $61.75piece
  • ДоставкаБесплатная доставка
  • Рейтинги3,7 (409)

Oписание продукта

USA Znse co2 laser lens 20mm dia 50.8mm focus length

12PCS USA lens 20*50.8mm . 

15 PCS MO mirror 25mm diameter 3mm thickness .

1.co2 laser focus lens 20mm diameter 50.8mm focal length 
 2.for co2 laser engraving and cutting machine 
 3.ZnSe material 
 4. other model number required please feel free to contact us
 
 
High Quality Original USA ZnSe Co2 Laser Lens 20mm Dia50.8mmFocus Length For Laser Cutting Machine

1PC CVD ZnSe Focus lens for co2 laser engraving and cutting machine 40w 50w60w 80w 100w 120w 150w

Lens information detail :

      Co2 laser Focus lens

Diameter

Focal Length

Edge Thickness

Structure

Material

mm

inch

mm

inch

mm

inch

 

 

19.01

0.75

 

50.8 2

2

0.08

plano-convex,Meniscus

ZnSe(USA)

 

 

 

 

Our lens feature                                                                                           

 

ZnSe has been made by means of import CVD from USA, and this material has low absorbance. The lens can withstand high power density and the surface coating is solid, not easy to fall off and wipe- resistant. After AR-coating has been coated on double-side of imported ZnSe, the transmissivity of the wavelength 10.6um, which is commonly used in CO2 laser industry, can reach 99.5%. We have optimized the design from two sides , diffraction and aberration have developed a series of products with minimum actual focal spot diameter in the case of the same focal length.

1

How to choice a suitable lens  :

1.Firstly choice the diameter of lens ,

image

2.Secondly measure the focus length

 

image

USA lens and Chinese lens                                                                                     

 

image

 

 

Lens cleaning method                                                                                    

cleaning lens

 

Clean lens, must be very careful, before cleaning, please look at the following notice:

1. Take lens must wear gloves or rubber gloves, because the dirt and oil droplets on the hand can contaminate the lens, cause performance decline.

2. Don\'t use any tool to take the lens, such as tweezers, etc.

3. Put the lens on paper, in order to avoid damage.

4. Don\'t put the glasses on rough or hard surface, infrared lens is easy to scrape.

5. Pure gold or pure copper surface don\'t clean and touch.

 

First step :clean the soft light pollutants (dust, the floe content)

 

  Use the air ball blowing off the surface of the lens skimmer, if cannot blow off the pollutant, continue to the second. Note: do not use compressed air of the factory, because it contained a lot of water and oil, oil and water In the membrane of the surface can form the absorption of harmful film.

 ( the lens with a mirror only need the first step)

 

Second step :gently clean light pollutants (dust, fingerprint)

 

Wet the swab or tampon with Sprinkled pure cotton, gently scrub the surface, attention to avoid the hard scrub. Across the surface as quickly as possible, beneficial to the liquid evaporated, not to leave stripe.

If this step can\'t remove dirt, continue to the third step.

Note: 

1) Use the handle paper and high quality cotton for surgery.

2) recommend to use the alcohol of. reagent grade.

 

The third step : clean the medium pollutants moderately (saliva, oil droplets)

 

wet the swab or cotton with White vinegar, scrubbing the surface with small force, then use a dry erase the redundant white vinegar. Then immediately wet the swab or cotton with alcohol, wipe the surface gently, wipe out the acetic acid. remained

If this step can\'t remove dirt, continue to step 4.

Note: 

1) can only use the swab with a handle

2) use the high quality cotton for surgery

3) recommended use the acetic acid with a concentration of 6%

 

Absolutely can\'t use the fourth step of the clean operating to the new lens. The following steps used only for very dirty lens and cleaning invalid lens. If membrane layer erased, the lens will lost its Function. The color of the obvious change said the membrane of the fall off.

 

 

Fourth step a

 

cleaning the serious pollution of the lens strongly (splash)

For those extreme pollution lens, we use a kind of polishing compound to remove these pollutants.

shake the polishing compound uniform, take 4-5 drops to the cotton, then start to move as a circle gently. Don\'t press the cotton, the weight of cotton is enough. If use too much pressure, polishing Cream will soon scratch the surface. Flip the lenses frequently, avoid polishing in the same direction excessively. The polishing time should be controlled in 30 seconds. Any time, found the color change, stop Polishing at once, It explain the membrane of the external is corrosion.

 

Fourth step b

 

Wet a new cotton With distilled water , clean the surface gently ,all wet with the lens, remove residual polishing compound as much as possible. Don\'t let the surface become dry, this will be difficult to remove the remaining polishing compound.

Fourth step c

Wet a burred swab with alcohol quickly , clean the whole surface gently, remove residual polishing compound as many as possible.

Note: if the diameter of the lens reaches more than 2 inches, use tampon instead of a swab for this step.

 

Fourth step d

Wet a burred swab with alcohol, clean the surface gently Remove the polishing compound and sprinkle fine left by the last step. Do the final cleaning with alcohol, wipe away the lens with the swab gently , overlap, until the whole surface is wiped. On the final scrubbing, moving a swab slowly to ensure that the surface of the rapid drying. This can eliminate the stripes of the surface.

 

The fifth step : the detection of cleaned lens

 

The last step is in the sunshine, black background check the lens surface carefully. If discover there remain polishing compound residue, can be repeated 4 b-4 d, until it is completely clear.

Note: 

some types of pollution or damage there is no way to remove, such as metal splash, dent, etc. If such pollution or damage lens are found, that means you need to replace the lens

 

Payment                                                                                                       

 

We accept bank TT (Telegraphic Transfer),western union paypal etc.

Payment must be made within 48hours of the auction end time

Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer responsibility.

 

Shipment  & packing                                                                                             

1. we will send the goods within 4working days once confirm your payment

2. the shipping cost does not include any import tax , and buyers are responsible for customs duties .

3.we ship mostly of the smaller order by China post Air mail , it usually takes about 15-45 business days to arrive. The fast shipping way : if you need goods urgently , please select the faster shipping way , we can send by DHL , FEDEX , UPS , EMS and so on ,

4. If you have not received your shipment , please contact us , we will track the shipment and get back to your as soon as possible , Our goal is customer’s satisfaction ,

5. All packages by DHL fedex to brazil need to give CNPJ /CPF . All the package to Russia need the full name(first name +middle name +last name )

packing

 

 

Refund                                                                                                          

When you have the parcel, and not satisfied the goods or it is other problem like as broken ,pls tell us the detail reason and provide the photos

Any reason required for all refund. Item must be in it\'s  original condition and no physical damage. Buyer responsible for all shipping cost

 

Contact us                                                                                                    

Welcome worldwide customer inquire and question ,we will try to do our best to feedback customers by email within 1 business days.

 

Your satisfaction and positive feedback is very important to us ,please leave positive feedback and 5 star , if you are satisfied with our items and service .

If you have any problem with our items or service  please be free to contact us first before you leave negative feedback ,we will do our best to solve any problem and provide you with the best customer service