Metal keypad Metal access control Waterproof 125KHz Anti vandal Standalone keypad

Metal keypad Metal access control Waterproof 125KHz Anti vandal Standalone keypad
  • Продавецshop.widaryanto.info
  • Список ценUS $30.00piece
  • Продажная ценаUS $30.00piece
  • ДоставкаБесплатная доставка
  • Рейтинги3,1 (394)

Oписание продукта

Perfect Digital Backlit Key Support 12V 24V Metal Keypad Access Control Manufacturer Fast Operating Speed SingleDoor RFID Access

N1EMNI-detailsN1-3NI-WEIGHT

Product-details

I.Main Features

The unit is single door multifunction standalone access controller or a Wiegand output keypad or card reader.

It is suitable for mounting either indoor or outdoor in harsh environments.

It is housed in a strong, sturdy and vandal proof Zinc Alloy electroplated case which is available in either a bright silver or matt silver finish. 

The electronics are fully potted so the unit is waterproof and conforms to IP68.

This unit supports up to 2000 users in either a Card, 4 digit PIN, or a Card + PIN option.

The inbuilt card reader supports 125KHZ EM cards,IF you need 13.56MHz Mifare cards.Please contact us!

 The unit has many extra features including lock output current short circuit protection, Wiegand output , and a backlit keypad.

These features make the unit an ideal choice for door access not only for small shops and domestic households

But also for commercial and industrial applications such as factories, warehouses, laboratories, banks and prisons.

II.Features

  • Waterproof, conforms to IP68
  • Strong Zinc Alloy Electroplated anti-vandal case
  • Full programming from the keypad
  • 2000 uses, supports Card, PIN, Card + PIN
  • Can be used as a stand alone keypad
  • Backlight keys,crystal glass Keypad,Perfect digital Backlit Key
  • Wiegand 26 input for connection to external reader
  • Wiegand 26 output for connection to a controller      
  • Adjustable Door Output time, Alarm time, Door Open time
  • Very low power consumption (30mA)
  • Fast operating speed, <20ms with 2000 users
  • Lock output current short circuit protection
  • Easy to install and program
  • Built in light dependent resistor (LDR) for anti tamper
  • Built in buzzer
  • Red, Yellow and Green LEDS display the working status

III.Specification

Operating Voltage

DC12V&DC24V

User Capacity

2000Users

Card Reading Distance

3-6 cm

Active Current

<60mA

Idle Current

25±5 mA

Lock Output Load

Max 3A

Alarm Output Load 

Max 20A

 Operating Temperature 

-45 to 60degree

Operating Humidity 

10%- 90% RH

Waterproof

Conforms to IP68

Adjustable Door Relay time

0 -99 seconds

Adjustable Alarm Time

0- 3 minutes

Wiegand Interface

Wiegand 26 

Wiring Connections

Electric Lock, Exit Button, External Alarm,External reader

IV.Wiring

Colour

Function

Description

Pink

BELL_A

Doorbell button one end

Pale blue

BELL_B

Doorbell button to the other end

Green

D0

WG output D0

White

D1

WG output D1

Grey

ALARM

Alarm negative(alarm positive connected 12 V+)

Yellow

OPEN

Exit button one end(the other end connected GND)

Brown

D_IN

Magnetic switch one end(the other end connected GND)

Red

12V+

12V + DC Regulated Power Input

Black

GND

12V - DC Regulated Power Input

Blue

NO

Relay normally-on end(Connect positive electric lock "-")

Purple

COM

Relay Public end, connect GND

Orange

NC

Relay Closed end(connect negative electric lock "-")

2RPN}Z_DQ47Q{$G$0HNT5U3

image

V. Anti Tamper Alarm

The unit uses a LDR (light dependent resistor) as an anti tamper alarm. If the keypad is removed from the cover then the tamper alarm will operate.

 

VI.Sound and Light Indication

Operation Status

Red Light

Green Light

Yellow Light

Buzzer

Power on

-

Bright

-

Di

Stand by

Bright

-

-

-

Press keypad

-

-

-

Di

Operation successful

-

Bright

-

Di

Operation failed

-

-

-

DiDiDi

Enter into programming mode

Bright

-

-

 

In the programming mode

-

-

Bright

Di

Exit from the programming mode

Bright

-

-

Di

Open the door

-

Bright

-

Di

Alarm

Bright

-

-

Alarm

 

VII.To Reset to Factory Default

a. Disconnect power from the unit

b. Press and hold # key whilst powering the unit back up

c. On hearing two “Di” release # key, system is now back factory settings

Please note only installer data is restored, user data will not be affected

Packing-list

Связанные категории